Alabaster Globe Wall Light in Matt Brass - IP44, G9, Dimmable

This wall light pairs a 150mm alabaster globe shade with a vertical matt brass arm, and carries an IP44 rating for bathroom zone 2 as well as any dry indoor room. Light passes through the alabaster stone and diffuses outward across the surface — the natural material softens the output without any additional diffuser. Veining pattern and tone vary from piece to piece as a natural property of the stone, not a manufacturing variation.

The frame is aluminium finished in matt brass. A cylindrical arm holds the globe above a circular wall plate, keeping the silhouette minimal against the wall. The fitting takes a single G9 lamp, not included — an LED G9 is recommended for both efficiency and dimming compatibility. Dimming requires a dimmable G9 lamp paired with a compatible dimmer switch.

For living rooms, hallways, or bedrooms where a bathroom rating is not needed, the Alabaster Round Wall Light with Brass Accent - 15W LED carries the same alabaster and matt brass combination with an integrated LED driver.

Key Features

• IP44 rated — suitable for bathroom zone 2 and all dry indoor rooms
• 150mm alabaster globe shade; natural stone veining varies between fittings
• Single G9 lamp fitting; LED G9 recommended; lamp not included
• Dimmable when used with a dimmable G9 lamp and a compatible dimmer switch
• Matt brass aluminium frame — vertical cylindrical arm with circular wall plate
• Height 340mm | Globe diameter 150mm | Overall depth 190mm | Base diameter 100mm

FAQs

Can this wall light be installed in a bathroom?

Yes. The IP44 rating makes it suitable for bathroom zone 2 — areas within 60cm of a bath or shower — as well as anywhere outside that zone. For zone 1 (directly above a bath or shower enclosure), a fitting with a higher IP rating would be required.

What bulb does this wall light require?

No. Bulb is not included — the fitting takes a G9 lamp, and an LED G9 is recommended. Dimming is possible but with a dimmable G9 LED lamp and a compatible dimmer switch. A standard non-dimmable G9 will light the fitting but cannot be dimmed.