Alabaster Sphere Pendant Light in Matt Brass - IP44, 3 Light E27

This alabaster sphere pendant hangs from a circular matt brass ceiling canopy on an adjustable rope suspension, with a brass band running around the equator of the shade. Three E27 lamp sockets sit inside the stone sphere — light passes through the alabaster and diffuses across the full surface, the natural veining becoming visible when the lamps are on. Tone and veining vary between shades as a characteristic of the stone.

Three E27 lamps are required but not included; LED E27 lamps are recommended for efficiency and dimming compatibility. Dimming requires dimmable E27 lamps and a compatible dimmer switch. The drop height is adjustable at the point of installation.

For a fixed-drop alabaster pendant with integrated LED, the Alabaster Ring Pendant Light in Matt Brass - 32W, Dimmable offers a ring form in the same material and finish.

Key Features

• Three E27 lamp sockets; LED E27 lamps recommended; lamps not included
• Dimmable with compatible dimmable E27 lamps and a compatible dimmer switch
• Alabaster sphere shade with brass equatorial band — 400mm diameter
• Matt brass aluminium ceiling canopy with adjustable rope suspension
• Natural alabaster veining and tone vary between shades
• Drop height adjustable at installation, IP44 rated

Frequently Asked Questions:

Do all three E27 lamps need to match for dimming to work correctly?
Yes — all three lamps should be the same model of dimmable LED E27, used with a compatible dimmer switch. Mixing dimmable and non-dimmable lamps on the same circuit can cause flickering or incomplete dimming. The lamps are not included with the fitting.

How is the drop height adjusted on this pendant?
The drop length is set at the point of installation via the rope suspension. The length can be shortened or extended within the rope's range during fitting — this is typically done by the installer before the ceiling canopy is fixed in place.