Alabaster Ring Pendant Light in Matt Brass - 32W, Dimmable

An alabaster ring pendant with a matt brass frame, designed to hang as a centrepiece above dining tables, kitchen islands, and open living spaces. The 500mm ring structure holds an alabaster diffuser that distributes the 32W LED output in a continuous, even glow around the full circumference — light wraps around the room rather than projecting downward from a single point.

The matt brass frame suspends the ring on three cables with a maximum drop of 1500mm. Drop height is adjustable during installation to suit the ceiling height and the surface beneath. The fitting itself is 110mm in height, giving the ring a clean, low-profile presence at its chosen hanging position. 32W integrated LED at 3000K warm white, CRI >80, dimmable. IP20 — dry rooms only.

For wall-mounted alabaster fittings in the same material and finish family, see our Alabaster Round Wall Light with Brass Accent - 15W LED.

Key Features:

• 500mm diameter alabaster ring — continuous ambient glow around full circumference
• Matt brass frame with three suspension cables, maximum 1500mm drop
• Drop height adjustable during installation to suit ceiling and surface height
• Fitting height 110mm — low-profile ring at the hanging position
• 32W integrated LED, 3000K warm white
• CRI >80 — accurate colour rendering
• Dimmable — full brightness adjustment, IP20 rated

Frequently Asked Questions:

What ceiling height is needed to install this pendant?
With a maximum cable drop of 1500mm and a fitting height of 110mm, a minimum ceiling of 2.4m is recommended. Cables can be shortened on site to suit lower ceilings.

What is the recommended hanging height above a dining table or kitchen island?
Position the base of the ring 700-800mm above the surface. At 500mm diameter, this fitting suits tables and islands up to approximately 1.2m wide.