Alabaster Crystal Ring Pendant Light in Brass, IP20, 40W LED, Dimmable

This ring pendant light combines a curved alabaster outer band with faceted crystal elements running along the inner lower edge of the ring. The alabaster forms the exterior circumference of the 580mm ring, with its characteristic warm veining visible across the surface. The crystal pieces on the inner edge refract and scatter light around the interior of the ring as the 40W integrated LED operates through both materials simultaneously at 3000K.

The fitting measures 580mm in diameter and 100mm in height. Four cables suspend it from a matching brass ceiling canopy, with total drop height adjustable up to a maximum of 1200mm. Compatible with a dimmer switch. IP20 rated for dry rooms. Brass finish throughout — canopy, frame, and fittings.

For a pendant with a purely alabaster form and integrated LED, the Alabaster Circular Pendant Light is available in both Black and Brass finishes as an alternative within the same range.

Key Features:

• 580mm diameter ring with alabaster outer band and faceted crystal inner edge
• 40W integrated LED — no separate lamp purchase required
• 3000K warm white colour temperature
• Compatible with a dimmer switch
• Height adjustable via four-cable suspension — maximum drop 1200mm
• IP20 rated, suitable for dry rooms
• Brass finish throughout — canopy, frame, and all fittings

Frequently Asked Questions:

Can the integrated LED be replaced when it reaches end of life?
The 40W LED module is integrated into the fitting and cannot be user-replaced. If the module fails, the fitting will need to be assessed by a qualified electrician.

What ceiling height and room size is this pendant suited to?
At 580mm in diameter, this fitting works well as a focal pendant in a dining room, living room, or hallway. For use above a dining table, a clearance of 700–900mm between the fitting and table surface is generally recommended. The 1200mm maximum drop gives enough range for most rooms with standard ceiling heights.