LED Garden Spike Light in Black - 5W, IP65, 2700K, Aluminium

This mains powered LED garden spike light runs on a 220–240V supply, delivering consistent brightness every evening regardless of weather or season. The 5W integrated LED produces 420 lumens at 2700K warm white through a 24° narrow beam — focused enough to uplight an individual tree, shrub or garden feature without spilling light where it is not needed.

With a CRI rating above 90, plant colours, stone and timber render close to their appearance in natural daylight, avoiding the washed-out effect common with lower-rated fittings. The cylindrical aluminium head mounts on an adjustable pivot, allowing the beam direction to be refined after the spike is set in the ground. Rated IP65, the fitting is fully dust-tight and protected against water jets in all directions.

The 150mm ground spike pushes directly into soil or lawn. A surface mounting plate is included in the package for installation on decking, patios or hard surfaces where a ground spike is not practical. Connection is via a hardwired cable — a qualified electrician is required to connect to a permanent outdoor supply.

Browse the full range in our garden spike lights collection.

Key Features

• 5W integrated LED, 2700K warm white, 420 lumens
• 24° narrow beam angle for focused uplighting
• CRI >90 — accurate colour rendering on plants and materials
• IP65 rated — dust-tight and water-jet resistant
• Mains powered, 220–240V (hardwired, no plug)
• Adjustable pivot head — beam direction set after installation
• Black aluminium body, corrosion resistant
• 220mm overall height, 150mm ground spike
• Not dimmable

Frequently Asked Questions:

Is this garden spike light solar powered or mains powered?
Mains powered, 220–240V. It requires a permanent outdoor power supply connected by a qualified electrician. Unlike solar fittings, output is consistent year-round regardless of weather.

Does this spike light need a separate LED lamp?
No. It has an integrated 5W LED module built in — no separate lamp purchase is required. The LED is not user-replaceable.