LED Garden Spike Light in Black - 10W, IP65, 2700K, Aluminium

This garden spike light is designed for larger garden features — mature trees, tall hedges and wide architectural elements. The 10W integrated LED delivers 1050 lumens through a 24° beam, maintaining a tight, focused projection at greater distances with minimal spill onto surrounding areas.

A honeycomb anti-glare grid sits inside the head between the body and the LED, reducing visible glare when the fitting is viewed from low angles across a lawn or path — without narrowing the beam angle. The die-cast aluminium head mounts on an adjustable pivot; once aimed at the target, the position is locked using the allen key supplied in the package. With a CRI rating above 90, plant foliage, stone and timber render in accurate colour rather than appearing bleached or flat.

Rated IP65, the fitting is fully protected against dust and water jets in all directions. The ground spike drives directly into soil or lawn, and a surface mounting plate is included for fixing to decking, patio or hard surfaces. Connection is via hardwired cable requiring a permanent outdoor supply installed by a qualified electrician.

For a lower-output option in the same range, see our 5W LED Garden Spike Light.

Key Features

• 10W integrated LED, 2700K warm white, 1050 lumens
• 24° narrow beam angle for focused long-distance uplighting
• Honeycomb anti-glare grid — reduces glare without affecting beam angle
• CRI >90 — accurate colour rendering on plants and materials
• IP65 rated — dust-tight and water-jet resistant
• Mains powered, 220–240V (hardwired, no plug)
• Die-cast aluminium adjustable head, locks with included allen key
• Ground spike and surface mounting plate both included
• Not dimmable

Frequently Asked Questions:

What is the honeycomb grid inside the head for?
It acts as an anti-glare filter, reducing visible glare from the LED source when viewed from low angles across a lawn or path. The 24° beam angle is unaffected.

How do I lock the head angle once it is aimed?
An allen key is included in the package. Once the head is directed at the intended target, tighten the pivot bolt with the allen key to fix it in position.